2009 with factory HID headlights. High beam is not working on the right/passengers side. It is not the bulb. I don't hear the click that I heard on the drivers sight. Driver info system was reporting an error, but after remvoing the headlight assmblies and swapping out a new bulb (which didn't help), I no longer get the notice on the info panel

The headlights (xenon) are working fine, but when I turn on the high beam, the high beam is not working. It is a bi-xenon headlight. When turning on the high beam, I got the blue icon on the dash that high beam is activated. What could be the problem?

1329 posts · Joined 2009. #2 · Nov 22, 2009. Go out and drive the car at night/in the dark. Steer car quickly left and right (do it safely). If you have adaptive Xenons, you will tell immediately that your headlights swivel left and right like two lanterns. Reply Like.

2004 XC90: drivers side headlight..is stuck on low beam..xenon high The driver's side headlight on my 2004 XC90 is stuck on low beam. The headlights are the bi-xenon high-intensity lights.
The wiring harness is at the bottom of the headlight enclosure. A quarter cup of water inside the enclosure is enough to short the bottom of the harness and cause low beam failure. Emptying the water and drying off both ends of the harness (QTips and bits of paper towel) are enough to bring the low beam back.
There is a little blue connection with two wires and one of the wires flaked off so I had to reconnect it and it solved the issue. Sent from my iPhone using Audizine. I am getting a mainbeam error on right side and the high beam doesn't work even after changing X1S bulbs.
IeYj.
  • woz7ihpthg.pages.dev/126
  • woz7ihpthg.pages.dev/437
  • woz7ihpthg.pages.dev/309
  • woz7ihpthg.pages.dev/459
  • woz7ihpthg.pages.dev/408
  • woz7ihpthg.pages.dev/223
  • woz7ihpthg.pages.dev/374
  • woz7ihpthg.pages.dev/156
  • bi xenon high beam not working